WEG CFW300 V1.3X, Programming Manual

Page: 22 / 157

0
Quick Reference of Parameters, Alarms and Faults
0-14 | CFW300
Param. Description Adjustable Range Factory Setting Prop. Page
P930
Automatic Adjustment of the PID
Controller Setpoint 0 = P911 inactive and P918
inactive
1 = P911 active and P918 inactive
2 = P911 inactive and P918 active
3 = P911 active and P918 active 0 18-15
P931 Proportional Gain 0.00 to 99.99 1.00 18-16
P932
Integral Gain 0.00 to 99.99 5.00 18-16
P933
Derivative Gain 0.00 to 99.99 0.00 18-16
P934 PID Controller Sampling Period 0.050 to 9.999 s 0.100 s cfg 18-16
P935 Filter for the PID Controller Control
Setpoint 0.000 to 9.999 s 0.150 s 18-17
P936 Deviation of the Control Process
Variable to Wake Up -9999 to 9999 [SPLC Eng. Un.] 30 18-17
P937 Time to Wake Up 0 to 9999 s 5 s 18-18
P938 Motor Speed to activate the Sleep
Mode 0.0 to 400.0 Hz 0.0 Hz 18-18
P939
Time to activate de Sleep Mode 0 to 9999 s 10 s 18-18
(*) Only available when some IO expansion accessory (CFW300-IOAR, CFW300-IODR, CFW300-IOADR or CFW300-IOAENC) is present (connected). For
further information, refer to the respective accessory guide.
(**)
Only available when some communication accessory (CFW300-CBLT, CFW300-CCAN or CFW300-CPDP) is present (connected). For further information,
refer to the respective accessory guide.
ro = read only parameter.
V/f = parameter available in V/f mode.
cfg = configuration parameter, value can only be changed with the motor stopped.
V VW = parameter available in V VW mode.