wayscral KICKWAY E1, User Manual

Page: 65 / 269

65/269
The ideal position for safe riding.
I. Control screen interface
The control screen, located on the handlebars, displayed the
status of the scooter, the speed, the battery charge, the front
and rear lights and any error codes. It also allows you to set
and enter the electronic lock code.
II. Electronic lock of the scooter
The scooter is equipped with an electronic locking system by
default, which prevents the engine from being switched on. When
the ignition button is pressed, the control screen beeps and the
unlock code is required. By default, this code is 000. If you attempt
to move the scooter without entering the code, the brakes will be
activated, the front and rear lights will flash and a continuous tone will
sound.
Please note that this does not prevent the scooter from
being physically stolen. To prevent this, use the built-in
anti-theft device (see below). Ideally should be used with
another anti-theft device.
Error code
Locking the scooter
Light indicator on
Pedestrian mode, flashes 3 times
Traffic speed indicator