background image

This manual should be considered a permanent part of the 
motorcycle and should remain with the motorcycle when resold 
or otherwise transferred to a new owner or operator. The 
manual contains important safety information and instructions 
which should be read carefully before operating the motorcycle.

California Proposition 65 Warning

Operating, servicing and maintaining a passenger 
vehicle or off-road vehicle can expose you to 
chemicals including engine exhaust, carbon 
monoxide, phthalates, and lead, which are known to 
the State of California to cause cancer and birth 
defects or other reproductive harm. To minimize 
exposure, avoid breathing exhaust, do not idle the 
engine except as necessary, service your vehicle in 
a well-ventilated area and wear gloves or wash your 
hands frequently when servicing your vehicle. For 
more information go to www.P65Warnings.ca.gov/ 
passenger-vehicle.

 WARNING

Top

3rd cover

2nd cover

Black

4/

1

6 mm

AN650Z (99011-26J55-03A)

Summary of Contents for Burgman Series














































































































































Reviews: