wayscral KICKWAY E1, User Manual

Page: 67 / 269

67/269
• L3: maximum speed 18 km/h
•
L4: maximum speed 25 km/h
6.
Pedestrian mode:
press the «-” button
for 3 seconds
to put the
scooter in pedestrian mode (speed limited to 3 km/h). On the
display, the number "3" flashes and the tail light flashes every 3
seconds.
Do not press the accelerator lever at the same time as the
pedestrian mode to avoid the electric scooter starting up
depending on the speed mode chosen.
The pedestrian mode can be activated when the user has to
walk next to the scooter. Pedestrian mode reduces the effort
required by providing a speed of 3 km/h.
IV. Speed controller
In order to activate the speed controller:
•
Hold the acceleration lever in the same position for 6 seconds.
• The speedometer icon lights up to indicate that the speed
controller is active.
To deactivate the speed controller:
•
Use the brake lever or
•
Press the acceleration lever
V. Speed alarm
• Your scooter has a built-in speed alarm that warns you when your
speed is too high, especially when going downhill. This is
triggered when the scooter's speed exceeds 30 km/h.
• Pay particular attention to the alarms, as riding at this or higher
speeds can cause you to lose control of your scooter and injure
yourself.