Redundancy Controller
Page
49
Document Number: 90-005-0030_E
Appendix C - Change the IP Address
Use this procedure to change the IP address. Contact Wavestream Technical Support at
to obtain a copy or replacement copy of the software.
Equipment
Wavestream
CD
(s
hipped with the unit)
WavestreamGUI.exe
DeviceInstaller (free download from
DeviceInstaller.exe
Procedure
Ethernet Connection
1.
Insert the Wavestream CD. Open the folder containing the DeviceInstaller.exe or obtain the
latest version from.
www.lantronix.com/device-networking/utilities-tools/device-
2.
Run
DeviceInstaller.exe
, it will self install.
3.
Click
Search
to search for the connected unit. The device installer will locate any devices on
the network.
It may ask for the MAC address of the unit. The MAC address is located on the unit
label.
Enter the MAC address, the unit will be located and the IP address displayed.
ip1a
If the unit is displayed in red with a status of
unreachable;
determine if the unit is set
to an IP domain different from the network/PC. It may take a few minutes to display
after cycling power.
N o t e
A correctly connected unit with power and Ethernet connectivity
is assumed prior to changing an IP address.
Antivirus software and/or firewalls may interfere with the
installation of Wavestream software.
Consult an IT specialist if needed.