Redundancy Controller
Page
5
Document Number: 90-005-0030_E
Introduction
Wavestream’s Redundancy Controller provides intelligent control of Wavestream amplifiers in a 1:1
configuration along with corresponding receive paths. The compact (1U) rack-mount chassis has a 4-
line, backlit LCD display and status LEDs, menu navigation keys, 1:1 string switching or
independent TX and RX switching, integrated waveguide switch control, alarm interface with
flexible input and output alarm processing and Ethernet interface for NMS (Network Management
Systems) integration.
Key Features:
Control of Wavestream Amplifiers/BUCS in a 1:1 configuration
Control of non-Wavestream Amplifiers with discrete inputs in a 1:1 configuration
Automatic switchover on amplifier failure with support for manual override
User selectable switching mode
Manual switch operation, does not affect automatic fail-over switch operation
Auto sensing of switch position
Receive waveguide switch toggles in response to an alarm condition on pin 1 or pin2 of
connector J2
Remote monitor and control interface via Ethernet Console A port
Firmware upgrade port via the USB Console B port
About This Manual
This operation manual provides information and instructions for installation and operation of
Wavestream equipment. It should be used by trained field technicians, or system engineers,
responsible for satellite and broadcast networks.
This manual refers to a waveguide switch as a baseball switch. A baseball
switch is an industry standard name for a certain type of waveguide switch.
For manual updates contact Wavestream support.
POSITION
A