Innovation - Edge [i] Installation, Operation, Maintenance Manual
FORWARD
OMM-0143_A
• GF
-216
•
9/6/2019
Technical Support
•
(800) 526-0288
•
Mon-Fri, 8 am - 5 pm EST Page 7 of 170
FOREWORD
The AERCO Innovation Series Potable Water Heaters are tankless modulating units which
represent a true industry advance that meets the needs of today's energy efficiency and
environmental concerns. Innovation’s compact size and robust venting capabilities allow
maximum installation flexibility. The Innovation Series Heaters, with their load tracking controls
can modulate up to 30:1
turn down ratio to match the system demand and yield high thermal
efficiencies.
Innovation Water Heaters are available in four (4) different sizes ranging from 625,000 BTU/Hr.
(183.2 kW) input to 1,350,000 BTU/Hr. (395.6 kW) input, all with Natural Gas gas trains. The
available models are listed below.
All Innovation models include Water Heater Management (WHM) software, which is built into the
unit’s Edge Controller. When the heater is ordered with a Sequencing Valve (SV), up to 16
Innovation Water Heaters can be controlled by the WHM system utilizing RS485 Modbus
protocol. Units can be ordered with or without Sequencing Valves.
When installed and operated on natural gas in accordance with this Instruction Manual, the
Innovation Series models covered herein comply with the NOx emission standards outlined in:
1. South Coast Air Quality Management District (SCAQMD), Rule 1146.2
2. Texas Commission on Environmental Quality (TCEQ), Title 30, Chapter 117,
Rule 117.465
Whether used in singular or modular arrangements, Innovation Water Heaters offer the
maximum flexibility in venting with minimu
m installation space requirements. Innovation’s
advanced electronic controls offer simplified integration with today’s Energy Management
Systems.
For service or parts, contact your local sales representative or AERCO International, Inc.
IMPORTANT!
Unless otherwise specified, the descriptions and procedures provided in this Installation,
Operation & Maintenance Manual apply to all Innovation Series Water Heaters.
TABLE F1:
INNOVATION POTABLE WATER HEATER MODELS
Models
Description
Shipping
Weight
INN 600N
Innovation Potable Water Heater, 625,000 BTU/Hr. (183.2 kW) Input
1,060 lbs.
(480.8 kg.)
INN 800N
Innovation Potable Water Heater, 800,000 BTU/Hr. (234.5 kW) Input
1,080 lbs.
(489.9 kg.)
INN 1060N
Innovation Potable Water Heater, 1,060,000 BTU/Hr. (310.7 kW) Input
1,100 lbs.
(499.0 kg.)
INN 1350N
Innovation Potable Water Heater, 1,400,000 BTU/Hr. (410.3 kW) Input
1,150 lbs.
(521.6 kg.)