Innovation - Edge [i] Installation, Operation, Maintenance Manual
CHAPTER 3
– OPERATION
OMM-0143_A
• GF
-216
•
9/6/2019
Technical Support
•
(800) 526-0288
•
Mon-Fri, 8 am - 5 pm EST Page 36 of 170
Figure 3.2: Edge Controller Front Panel Layout
The Soft-
Keys on the Controller’s front face function as follows:
TABLE 3.2: Controller Front Panel Controls
Icon
Name
Description
Previous
Takes you to the previous screen.
Home
Takes you to the
touchscreen’s Main Menu (see Figure 1.2). If pressed
during a procedure, it aborts the procedure.
Up/Down
These buttons activate a selection box that can then be moved sequentially
through the editable/selectable parameters starting from top left (not the
title bar with home/previous icons) and moving right and then down as in
reading a book.
Edit
This button allows the editing of the parameter that is currently selected
through use of up/down arrows.
1
Multi-Function Bar, shows either:
•
Fire Rate
•
Valve Position
2
Parameter Indicator for both temperature
read-outs:
•
LEFT:
Inlet
temperature
or
Setpoint
temperature
•
RIGHT:
Outlet
temperature
or
System Header temperature
3
Temperature scale indicator: Fahrenheit or
Celsius
4
Configurable temperature read-outs (2):
•
LEFT:
Inlet
or
Setpoint temperature
•
RIGHT:
Outlet
or S
ystem Header
temperature
5
Operation Mode Indicators (2):
•
LEFT:
Demand
or
Manual
•
RIGHT:
Manager
(BST only),
COMM
when communicating
6
Edge Controller Touchscreen: see Section
1.8, below
7
Soft Keys: see table below
8
onAER Indicator Light
Fault Indicator Light
9
Ready Light
10
Enable/Disable Switch
11
Low Water Level Test buttons (2):
•
TEST
: Initiates Low Water test
•
RESET
: Resets unit after Low Water
test
1
2
3
6
4
5
7
10
11
9
8