background image

1

 ELCOS SRL 

- Parma - RA-0511 1011 RA-0500 1000 1500 RA-0501 1001 1501 2501- EN

WATER HEATERS

Suitable for heating water in diesel engines with closed 

circuit cooling

- OPTIMUM DIELECTRIC STRENGTH.

- EASY CONNECTION VIA CABLE.

- TEMPERATURE MAINTAINED BY AN 

  INTERNAL THERMOSTAT.

 A SECOND INTERNAL THERMOSTAT 

PROTECTS THE APPLIANCE FROM ANY 

OVERHEATING.

- CAN BE MOUNTED DIRECTLY ONTO THE 

ENGINE.

Coolant drainage 

plug

The heater prevents the cooling circuit temperature from falling below a certain value.

This value is regulated by an internal thermostat. A second internal thermostat protects the applian-

ce from any overheating.

INSTR

UCTION  AND  USE  MANU

AL

(Connectors not provi-

ded)

Type

RA-0500  

(500 W)

RA-1000 

(1000 W)

RA-1500 

(1500 W)

Type

RA-0501  

(500 W)

RA-1001 

(1000 W)

RA-1501 

(1500 W)

RA-2501 

(2500 W

)

Version with GAS ½” thread

Version with GAS ½” thread

Version with hose connector-

for hose with  16 internal Ø

Type

RA-0511  

(500 W)

RA-1011 

(1000 W)

(Connectors not provided)

The key features of our water 

heaters:

Direct assembly, without 

the use of brackets.

Presence of a coolant 

drainage plug.

Factory fitted 3-metre 

power feed cable.

Special electro-coating 

applied to body that 

protects from glycol 

corrosion

Summary of Contents for RA-0511









Reviews: