Figure 2–22: Aligning and inserting the leak sensor in the MS-bracket drip tray
Slot in column-heater housing for routing leak-sensor cable
Leak-sensor T-bar
Slot in leak-sensor reservoir
Drain tubing
12. Route the leak-sensor cable through the slot in the column-heater housing.
13. Push the drain tubing onto the barbed drain fitting on the left-hand side of the MS-bracket
drip tray and route it to a suitable waste container.
December 4, 2019, 715005052 Version 02 (previously released as Rev.B)
Page 35
