manualshive.com logo in svg

Waters ACQUITY Arc System, System Manual, Page: 40 / 86

Share
Download
Waters ACQUITY Arc System System Manual Download Page 40

You can access these additional functions by right-clicking anywhere in the detector
control panel.

Table 3–7: Additional functions in the 2998 PDA detector control panel

Control panel function

Description

Autozero

Resets the detector offsets.

Launch Console

Launches the console software.

Reset module

Resets the detector after an error condition.

Help

Displays console online Help.

3.3.5 2424 ELS control panel

The 2424 Evaporative Light Scattering detector’s control panel displays light
scattering units, photomultiplier tube gain factor, gas pressure, nebulizer
temperature, and drift tube temperature.

Lamp LED – Mirrors the lamp status LED on the front panel of the detector,
unless communications with the detector are lost.

Current column heater temperature – Displays the current column heater
temperature.

Column heater set point – Displays the column heater set point.

Lamp icon – When clicked, ignites or extinguishes the lamp. If the icon is green,
the lamp is ignited. If the icon is red, the lamp is extinguished.

Current nebulizer temperature – Displays the current nebulizer temperature.

June 12, 2015, 715004747 Rev. A

Page 40

Summary of Contents for ACQUITY Arc System























































































Reviews:

No comments