12
SAFETY
The following are some general use recommendations to ensure the safest and optimal
operation of the Slider.
CHAIN AND HANDLE
The chain and oar handle must be kept in good condition to prevent any reduction in
performance of the machine, increased wear, and/or risk of failure, which could result
in injury to the user. Check the condition of the chain regularly (particularly the swivel
attachment where the chain and the U bolt on the handle meet). If the hole in the swivel
becomes worn or the U bolt weakened, contact your Slider distributor for replacement
parts. Recommendations to prolong the life of the chain and components are:
•
Do not release the handle until it is resting against the handle holder or the
chain faring. Letting the handle fly back to the chain faring could damage the
links in the chain, chain connector swivel, handle, chain faring and/or the STM
workout monitor.
•
Use both hands to pull back on the handle. One-hand rowing causes sideload
on the chain and connector, which can compromise the structural strength of
these parts.
•
Never twist chain or pull from side to side.
Please note: Abuse of the chain can result in injury.
LOCKING THE ROLLING FRAME
DO NOT USE THE SLIDER IN THE LOCKED POSITION. To do so will cause damage to the
rail frames and weaken the locking mechanism.
MOVING AND STORING IN AN UPRIGHT POSITION
The Slider has wheels located on the front legs to help move the machine. ALWAYS PUT
THE FRAME LOCK IN THE LOCKED POSITION
BEFORE MOVING THE SLIDER. Once the rolling
frame is locked, lift the rear of the machine to
engage the front wheels on the ground. Wheel
the machine into position and stand the machine
upright on the front end. Only store the machine
upright on a level and even surface.
OWNER’S MANUAL
LOCKED
Keep locked for
STORAGE and MOVING
UNLOCKED
Keep unlocked while
Slider is in use.
5mm
Summary of Contents for Be Dynamic Slider
Page 1: ...ASSEMBLY MANUAL OWNER S MANUAL MONITOR MANUAL ...
Page 2: ...2 ...
