4
STEP 1 - BUILD THE BASE RAIL FRAME
The first step in assembling the Slider is to attach the front and rear legs to the base
rails.
1. Place the rails (
A
) apart with the bolts (already attached) facing up.
2. Loosen all 8 bolts so there is about 5mm of clearance (see 1.1).
3. Line up the keyholes to the bolts on the rear leg (
C
) and front leg (
B
) as
shown below.
NOTE:
The rear leg (
C
) will go on the bolts with the narrow part of the keyhole closest to the
end of the rails (See 1.2).
The front leg (
B
) will have the wheels positioned toward the front of the rails (see 1.3).
4. Hand-tighten all bolts, then tighten with the ratchet (
J
).
5. Flip over the base rail frame.
5mm
1.3
1.1
1.2
Summary of Contents for Be Dynamic Slider
Page 1: ...ASSEMBLY MANUAL OWNER S MANUAL MONITOR MANUAL ...
Page 2: ...2 ...
