10
STEP 8 - MOUNTING THE FRONT ASSEMBLY TO THE TOP RAIL FRAME
1. Loosen the 4 bolts (already attached) from the top rail frame so there is about 5mm of
clearance (see 9.1).
2. Carefully place front assembly (
G
) onto the top rail frame (
E
), making sure to line up
keyholes to the loosened bolts.
3. Once front assembly has been placed into the correct position, push it towards the
front of the Slider to lock into place.
4. After double checking the locking plate is in the LOCKED position, slowly stand the
slider up (see 9.2).
5. Tighten the 4 bolts with the ratchet (see 9.3).
5mm
9.1
9.2
9.3
Summary of Contents for Be Dynamic Slider
Page 1: ...ASSEMBLY MANUAL OWNER S MANUAL MONITOR MANUAL ...
Page 2: ...2 ...
