23
OTHER FEATURES
The STM uses the advanced self calibration algorithm to give consistent scores
across all resistance settings. This allows scores to be comparable from machine
to machine.
To save on battery life, the monitor has a time out function set at 3 minutes after
the last button action, rowing stroke or completed workout.
SOFTWARE UPDATES
From time to time, Slider will release software updates that might rectify unseen
bugs in the software or add functionality to the monitor.
To view the current software installed on the monitor, press
ARROW UP
button to
activate the Interval field in the bottom centre of the display. Then press
READY
. The
software version will display in the bottom right display field shown below.
To update the software, follow the procedure set out in the update pdf that comes
with the software update. You will initially have to install the update drivers to your
PC running Windows XP, Vista or higher. Once the drivers are installed connect the
PC to the monitor using a USB cable and update. This should take about 30 secs
and the new software will be uploaded ready for use.
We will send software updates to our existing customers as they are released or
they will be available to download from the Slider website.
PORTS
On the rear of the monitor there are four ports for specific cable connection.
SENSOR PORT - this port is for the flywheel sensor cable
HR PORT - this port is for the Heart Rate receiver
USB PORT - for connecting the monitor to a computer via a USB-B cable
NETWORK PORT - for connecting to other monitors
(not currently configured)
BATTERIES
The Slider Workout Monitor uses 4 AA standard batteries and access to the battery
compartment is by sliding open the battery cover located at the rear of the monitor
beneath the Ports.
Summary of Contents for Be Dynamic Slider
Page 1: ...ASSEMBLY MANUAL OWNER S MANUAL MONITOR MANUAL ...
Page 2: ...2 ...
