Waterous AQUIS ULTRAFLOW, Installation, Operation And Maintenance Manual

Page: 4 / 217

System Components—2.0 Meter CANbus Cable Extension 78
System Components—0.5 Meter M12 Cable Extension 79
System Components—3.0 Meter Cable Extension 80
System Components—Manual Override Switch Cable Extension 81
System Components—Manual Override Relay Cable 82
System Components—Concentrate Pump Speed Sensor Cable 83
System Components—Hydraulic Pump Swashplate Control Cable 84
System Components—DLA Control Valve Cable 85
System Components—Priming Valve Motor Cable 86
System Components—Tellurus HMI Cable Assembly 87
System Components—Display Extension Cable 88
Installation 89
Installation Overview 89
Preparing for the Installation 89
Modifying the Equipment 89
Determining Panel and Plate Locations 90
Determining Hose Routing 90
Determining Cable and Wire Routing 90
Main Components—Overview 91
Electrical Connections—Overview 93
Hydraulic Components—Overview 95
Hydraulic Hoses—Overview 97
Plumbing and Components—Overview 99
Wiring the Source-Select Switch 101
Installing the DLA Identification Labels 102
Connecting the 1 Inch DLA 103
Connecting the 2 Inch DLA 104
Connecting Pump Discharge-Pressure Sensor 105
Connecting the Priming Valve 106
Connecting the 1 Inch Low Flow Bypass Line—Optional 107
Connecting the Supply Tank Fill Line 108
Connecting the Tellurus Display 109
Connecting the Concentrate Supply Level Sensors 110
Connecting the Concentrate Pump, Pressure Sensor, and Source Select Valve 111
Connecting the Hydraulic Reservoir Sensors, Suction Strainer, and Hydraulic Pump 112
Connecting the Hydraulic-Oil Cooler and Controller 113
Installing the Hydraulic Motor and Concentrate Pump 114
Connecting the Manual Override—Optional 115
Configuring the System 116
Entering the Configuration Desktop 118