116
|
217
Product Overview
Operation
Configuring the System
Each ULTRAFLOW system is composed of a few
basic elements and is configured to your specific
application. Common elements include components
such as DLAs, flowmeters, valves,switches,
sensors, as well as mechanical and plumbing
components.
The system is configure using the Tellurus. The
configuration can be divided into 2 levels. One level
is the installer-level configuration and the other is
the user-level configuration. The installer level
configuration defines permanent aspects of the
system—numbers of DLAs, K-factors, flow rates,
along with other system-level behaviors. The
user-level configuration defines items such as
discharge names, colors, button location, among
other user-level concerns.
Any configuration settings can be updated, and the
entire system configuration can be saved to a
removable drive, to restore or troubleshoot the
system.
Use the following section to configure the system
during installation, or to configure it to your specific
application. Contact Waterous for more information.
