Watchguard Firebox X15, User Manual

Page: 62 / 266

Configuration and Management Basics
48 WatchGuard Firebox X Edge
N
OTE
These passphrases must match the passphrases you use when you
add the device to WatchGuard System Manager or the connection
will fail.
8
In the Management Server Address text box, type the IP
address of the Management Server if it has a public IP address.
If the Management Server has a private IP address, type the
public IP address of the Firebox protecting the Management
Server.
The Firebox protecting the Management Server automatically monitors
all ports used by the Management Server and will forward any
connection on these ports to the configured Management Server. No
special configuration is necessary for this to occur.
9
Type the Client Name to give your Firebox X Edge.
This is the name used to identify the Edge in the Management Server.
10
Type the Shared Key .
The shared key is used to encrypt the connection between the
Management Server and the Firebox X Edge. This shared key must be the
same on the Edge and the Management Server. You must get the shared
key from your VPN administrator.
11
Click Submit .
Enable remote management with WSM v8.0 or v8.1
Follow these instructions to configure remote access from Watch-
Guard System Manager v8.0 or 8.1. These versions of WatchGuard
System Manager allow the management of VPN tunnels but do not
support centralized management.
1 To connect to the System Status page, type
https://
in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1