Watchguard Firebox X15, User Manual

Page: 208 / 266

Configuring the MUVPN Client
194 WatchGuard Firebox X Edge
Preferred
If the virtual adapter is in use or it is not available, the mobile
user does not use a virtual adapter to connect with the MUVPN
client.
If the virtual adapter is available, the remote computer is
assigned the WINS and DNS addresses you entered in the
Firebox Users > Settings area of the Edge configuration pages.
Required
The mobile user must use a virtual adapter to connect with the
MUVPN client. If the virtual adapter is not available on the
MUVPN client computer, the VPN tunnel cannot connect.
The remote computer is assigned WINS and DNS addresses you
entered in the
Firebox Users > Settings area of the Edge
configuration pages.
• Type the IP addresses of the DNS and WINS servers for the
MUVPN clients.
For more information on these settings, see “Configuring MUVPN
client settings” on page 140.
Enabling MUVPN access for a Firebox user account
1 Add a new Firebox user or edit a Firebox user, as described in
“Using Local Firebox Authentication” on page 142.
2 Click the
MUVPN
tab.
3
Select the Enable MUVPN for this account check box.
4
Type a shared key in the related field.
The .wgx file is encrypted with this shared key. The user enters the shared
key when the .wgx file is imported. Do not give the shared key to any
user that is not authorized to use this Firebox user account.
5
Type the virtual IP address in the related field.
The virtual IP address must be an address on the Firebox X Edge trusted
network that is not used. This address is used by the remote computer to
connect to the Firebox X Edge.
6
From the Authentication Algorithm drop-down list, select the
type of authentication.
The options are MD5-HMAC and SHA1-HMAC.
7 From the
Encryption Algorithm
drop-down list, select the type
of encryption.
The options are DES-CBC and 3DES-CBC.