30
MN-111 | Instructions for use | MN-111 W&H Med ENG Rev11 | 2019/01/25 | © 2019 W&H Sterilization Srl
Getting started
SET THE DISPLAY BRIGHTNESS
To change the display brightness:
1
On the homepage tap
>
>
2
Tap
or
to change the value.
3
Tap
to confirm.
SET THE NETWORK ADDRESS (OPTIONAL)
Refer to your network administrator or IT manager for more
information about your network.
If your network supports dynamic IP, skip this procedure. Otherwise
follow this procedure and enter the data suggested by your network
administrator or IT manager.
1
On the homepage tap
>
>
>
>
>
2
In IP Configuration tap Static: the
text boxes are enabled.
3
Enter the data: the frames highlight.
If a frame turns dark grey, check
and correct the entered data.
4
In DNS Configuration tap Static: the
text boxes are enabled.
5
Enter the data: the frames highlight.
If a frame turns dark grey, check
and correct the entered data.
Summary of Contents for MN-111
Page 1: ...MN 111 110 V 220 V Instructions for use MN 111 W H Med ENG Rev11 ...
Page 2: ......
Page 103: ......
