W&H Med Lara Instructions For Use Manual Download Page 25

Page: 25 / 122

Lara | Instructions for Use | RIL-1 W&H Med ENG Rev06 | 14/04/2022 | © W&H Sterilization Srl

Getting started

Icon

Label

Function

Connectivity

Opens the pages to manage the network connection.

Eliso Status

Only if this service is supported in the country of use,
and if the sterilizer is connected to it. Shows the
status of the connection with the W&H monitoring
server.

Akidata status

IoDent

WI-FI

Activates a communication protocol between the
sterilizer and an external gateway to extend
connectivity features.

Network Status

Only with a network connection set. Provides
information about the network status.

Remote Data
Storage

Only with a network connection set. Opens the page to
manage the remote storage.

Settings

Only with a network connection set. Sets the
parameters of the network location.

Save all

Only with a network connection set. Copies all the files
in the specified location in the network.

Icon

Label

Function

Test

Only with a network connection set. Checks if the files
can be copied to the specified location.

USB options

Enables/disables USB warning messages.

Traceability
settings

Chooses if the sterilizer is master or slave.

TRACEABILITY MENU FUNCTIONS

Icon

Label

Function

Cycle History

Shows all the sterilization cycles and tests and prints
reports and labels.

Save

Saves all the sterilization cycle reports in the USB
pen drive.

User
Management

Optional, activated with an activation code.Permits
manage the users.

Add User

Administrator only. Adds a user.

Delete User

Administrator only. Deletes a user.

Summary of Contents for Lara



























































































































Search results

Summary of Contents for Lara

Reviews:

Related manuals for Lara

Brands by name

Popular brands

W&H Med Lara, Instructions For Use Manual

Search results

Summary of Contents for Lara

Reviews:

Related manuals for Lara

Brands by name

Popular brands