W&H Med Lara Instructions For Use Manual Download Page 101

Page: 101 / 122

Technical data

Lara | Instructions for Use | RIL-1 W&H Med ENG Rev06 | 14/04/2022 | © W&H Sterilization Srl

101

MAXIMUM LOAD FOR INSTRUMENTS

Note

: the load given includes the trays, the containers and everything is put into the chamber, with the sole exclusion of the tray rack.

Instruments

Bagged

Unwrapped

Porous

Lara 17

Lara 22

Lara 17

Lara 22

Lara 17

Lara 22

B Universal 134

4.5 kg (10 lbs)

5.5 kg(12.1 lbs)

4.5 kg (10 lbs)

5.5 kg(12.1 lbs)

1.5 kg (3.3 lbs)

2.0 kg (4.4 lbs)

B Prion / Extended 134

4.5 kg (10 lbs)

5.5 kg(12.1 lbs)

4.5 kg (10 lbs)

5.5 kg(12.1 lbs)

1.5 kg (3.3 lbs)

2.0 kg (4.4 lbs)

B Universal 121

4.5 kg (10 lbs)

5.5 kg(12.1 lbs)

4.5 kg (10 lbs)

5.5 kg (12.1 lbs)

1.5 kg (3.3 lbs)

2.0 kg (4.4 lbs)

S Fast 134

2.0 kg (4.4 lbs)

MAXIMUM LOAD FOR CONTAINERS

The correct dryness can only be obtained with the AUTO DRY and ECO DRY plus modes.

Lara 17

Lara 22

B Universal 134

9.0 kg (19.8 lbs) 9.0 kg (19.8 lbs)

B Prion / Extended 134

9.0 kg (19.8 lbs) 9.0 kg (19.8 lbs)

B Universal 121

9.0 kg (19.8 lbs) 9.0 kg (19.8 lbs)

S Fast 134

not suitable

Summary of Contents for Lara



























































































































Search results

Summary of Contents for Lara

Reviews:

Related manuals for Lara

Brands by name

Popular brands

W&H Med Lara, Instructions For Use Manual

Search results

Summary of Contents for Lara

Reviews:

Related manuals for Lara

Brands by name

Popular brands