Wahlberg 241, User Manual

Page: 2 / 40

241.805.012 2 Date: 2017-10-24
Safety Information
The following symbols are used to identify important safety information on the product
an in this manual:
This product is for professional use only. It is not for household use.
This product presents risks for severe injury or death due to fire hazards, electric
shock, and falls.
Read this manual before installing, powering or servicing the winch; follow the safety
precautions listed below and observe all warnings in this manual and printed on the
winch. If you have questions about how to operate the winch safely, please contact
you Wahlberg Motion Design supplier or Wahlberg Motion Design.
PROTECTION FROM ELECTRIC SHOCK
− Disconnect the winch from AC power before removing or installing any cover or
part and not when in use.
− Always ground (earth) the winch electrically.
− Use only a source of AC power that complies with local building and electrical
codes and has both overload and ground-fault (earth-fault) protection.
− Before using the winch, check that all power distribution equipment and cables
are in perfect condition and rated for the current requirements of all connected
devices.
− Power input throughput cables must be rated 20 A minimum, have three
conductors 1.5 mm
2
(AWG16) minimum conductor size and an outer cable
diameter of 5-15 mm (0.2-0.6 inch). Cables must be hard usage type (SJT or
equivalent) and heat-resistant to 90°C (194°F) minimum. In the EU the cables
must be <HAR> or equivalent.
− Use only Neutrik powerCON TRUE1 NAC3FX-W cable connectors to connect to
power input sockets. Use only Neutrik powerCON TRUE1 NAC3MX-W cable
connectors to connect to power throughput sockets.
− Assembly power supply cables following the instructions in this manual only (see
page 13).