241.805.012
6
Date: 2017-10-24
Technical specifications
Model:
Winch 10
Item no.:
241
Dimensions (L×H×W):
205 × 224 × 148 mm / 8.1 × 8.8 × 5.8 in
(Without mounting clamp)
Power supply:
230 V AC 50 Hz (optional 120V/60Hz).
Power consumption:
Max 120 Watt
Power inlet/outlet:
Neutrik powerCON TRUE1 NAC3PX (F/M)
DMX control signal:
DMX 512 1990 + DMX512A / 7 channels used.
DMX connection:
5 pole XLR, In & link
Lifting height:
10 m (33 ft.)
Lifting capacity:
10 kg (22 lb)
Lifting speed:
Variable, 5-30 cm/s (2-11.8 in/s)
Snap hook:
8 mm (5/16 in) galvanized steel
Capability of overload test:
Yes, at 125% of maximum load.
Wire fleet angle:
None
Minimum load:
0.4 kg (0.88 lb)
Noise emission:
~55 dB (max measured noise at 1 m/3.3 ft.)
Weight:
5.2 kg (11.5 lb)
Mounting clamp:
Slim eye coupler 50 mm (2 in)
Motor:
24 V DC, 28.9 Watt, IP30
Lifting wire specifications:
Lifting wire:
2 mm (5/64 in) 7x7 galv. steel wire (EN 12385-4)
Minimum breaking load (wire):
280 kg (2750 N / 618 lb)
Wire safety factor:
minimum 10
Maximum expected wire lifetime:
−
At 2.5 kg (5.5 lb) load
Up to 80,000 cycles running up and down.
−
At 5.0 kg (11.0 lb) load
Up to 20,000 cycles running up and down.
−
At 10 kg (22.0 lb) load
Up to 15,000 cycles running up and down.
Summary of Contents for 241
