WAGO 750-8207 Manual Download Page 251

Page: 251 / 410

WAGO-I/O-SYSTEM 750

Run-time System CODESYS 2.3 251

750-8207 PFC200 CS 2ETH RS 3G

Manual

Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)

Figure 91: Flag Area

8.6.1

Process Images for I/O Modules Connected to the

Controller

After starting the fieldbus controller, it automatically detects all connected I/O

modules.

The analog input and output data is stored first word by word in the process

image. Subsequent to this, come the digital input and output data bits combined

to form words.

The size and structure of the process image for the I/O modules connected to the

system are described in the appendix.

Summary of Contents for 750-8207



























































































































































































































































































































































































































Search results

Summary of Contents for 750-8207

Reviews:

Related manuals for 750-8207

Brands by name

Popular brands

WAGO 750-8207, Manual

Search results

Summary of Contents for 750-8207

Reviews:

Related manuals for 750-8207

Brands by name

Popular brands