WAGO 750-8207 Manual Download Page 116

Page: 116 / 410

116 Commissioning

WAGO-I/O-SYSTEM 750

750-8207 PFC200 CS 2ETH RS 3G

Manual

Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)

Table 54: WBM “Ethernet Configuration” Page – “Interface Xn” Groups

Parameter

Explanation

Enabled

You can enable or disable the interface.

Autonegotiation on

When Autonegotiation is enabled, the connection

modalities are negotiated automatically with the peer

devices.

Speed/Duplex

Select the transmission speed and the duplex

method:
10 Mbit half-duplex

Information can only be

sent or received.

100 Mbit half-duplex

10 Mbit full-duplex

Information can be sent

and received

simultaneously.

100 Mbit full-duplex

Click

[Submit]

to apply changes. The changes are effective immediately.

Summary of Contents for 750-8207



























































































































































































































































































































































































































Search results

Summary of Contents for 750-8207

Reviews:

Related manuals for 750-8207

Brands by name

Popular brands

WAGO 750-8207, Manual

Search results

Summary of Contents for 750-8207

Reviews:

Related manuals for 750-8207

Brands by name

Popular brands