39
OPERATING MANUAL
VERSION 02/2018
ORDER NUMBER DOC 2366717
5.7.2 MODE OF OPERATION
Recipe display
When the spray gun is connected to the control unit and the
control unit is switched on, the pre-defined recipe (R1, R2 or R3) is
shown on the gun display (2) as follows.
Recipe 1
Recipe 2
Recipe 3
Recipe change R1 R2 R3 R1
Press the operating button (4) and hold the button pressed for at
least 2 seconds to go forward 1 recipe.
R1
R3
R2
B_03182
2
4
3
Display (2)
= Recipe values changed temporarily:
If the operating key (4) is pressed for 2 seconds, the saved recipe values for the previously selected recipes
numbers will be reloaded from the memory.
Status display during spraying mode
During spraying mode (trigger lever pressed), the status is shown in the display (2) by LEDs.
LED display
Description
LEDs 1 - 3 light up green
The spray gun is working in an optimal
high-voltage spray current range.
One or both right-hand LEDs illuminate in
orange.
Spray current too high.
Possible causes:
(Warning display: You can continue working
without any limitations.)
- Spray gun too close to the work piece
- Contamination of the spray gun
