91
91
ADJUSTING TIP FEEL AND DOUBLE-CLICK
To adjust the tip sensitivity of your pen, select the P
EN
tab.
Customizes the amount of pressure
needed to click, draw, or ink.
To create broad brush strokes or to click
with a light touch, use a S
OFT
tip setting.
For maximum control while drawing thin
lines, use a F
IRM
tip setting.
With your screen cursor positioned over
an empty area of the control panel, press
down on the pen display screen with your
pen tip. Use the pressure bar to
determine how hard you must press on
the pen to reach maximum pressure.
Click to
the tip sensitivity.
Tips:
•
Use a soft T
IP
F
EEL
for a wider range of pressure values in most pressure-sensitive applications.
•
In some applications a soft pressure setting can make the pen overreact so that slight pressure on the pen
will be magnified on the screen. If you experience this, try a firmer T
IP
F
EEL
setting.
•
To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
•
A large double-click distance may cause a delay at the beginning of brush strokes in some drawing
applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice
such effects, try setting a smaller double-click distance and using the side switch to double-click. You can
also
set an ExpressKey to double-click
Adjusts the size of the double-click
area. Drag slider to O
FF
if you do not
want
