Wacom Cintiq 24HD User Manual Download Page 113

Page: 113 / 160

113

113

5. Check multi-touch. Attempt to move the screen cursor by touching your finger in different places on

the pen display surface. Touch to select an item. The status LED should brighten. See also

testing

multi-touch

If the tablet driver does not load properly, basic touch movement will be recognized but other actions
and gestures will not. If gestures are not recognized, install the driver software.

6. Check the hardware control buttons. See

testing controls and input tools

and

testing the hardware

control buttons

7. Check the ExpressKeys. See

testing controls and input tools

and

testing the ExpressKeys

8. Check the Touch Rings. See

testing controls and input tools

and

testing the Touch Rings

9. Check any other tool(s), such as the optional Airbrush. See

testing controls and input tools

If you are still having problems, you may have a defective pen or pen display.

After testing, use the Wacom Tablet control panel to reconfigure your tablet and tools for any custom
settings you may originally have been using.

Summary of Contents for Cintiq 24HD

































































































































































Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands

Wacom Cintiq 24HD, User Manual

Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands