114
114
TESTING CONTROLS AND INPUT TOOLS
If the Grip Pen or the Cintiq controls do not work as you expect, it is a good idea to first check the
assigned functions or reset them to their default conditions. You will also want to do this if you have a
touch-sensitive model and encounter problems with multi-touch.
A quick way to return a pen to its default condition is to remove it from the control panel T
OOL
list. Do this
by selecting the pen and clicking on the T
OOL
list [ – ] button. After the pen has been removed, place it
back onto the display screen surface. The pen will be added back to the T
OOL
list with its default settings.
•
Open the Wacom Tablet control panel and click on the A
BOUT
button. In the dialog box that appears,
click D
IAGNOSE
.... The D
IAGNOSTICS
dialog box shows dynamic information about the Cintiq pen display,
your input tool(s), and appropriate information for touch-sensitive models.
•
If more than one pen display or tablet is connected to your system, in the T
ABLET
I
NFO
column select the
product you are testing.
•
Use the information shown in the D
IAGNOSTICS
dialog box when testing your pen display and pen.
Note: If a tool button is set to R
ADIAL
M
ENU
or O
PEN
/R
UN
..., that function will occur when the button is
pressed. In this case you may want to change the button function before testing.
Testing the hardware control buttons
Testing the ExpressKeys
Testing the Touch Rings
Testing a pen
Testing multi-touch
