background image

Contents

Index

Contents

153

Index

153

GLOSSARY

Active area.  The area of the pen display where multi-touch or your Cintiq tools are detected.  Se

touch 

sensor

.

Application-specific settings.  Cintiq tool and tablet settings that have been customized for individual 
applications.  The Wacom Tablet control panel enables you to customize a tool to behave uniquely in 
different applications.  

Application-specific settings

 are in effect whenever you use the application.

Aspect.  The ratio between the vertical and horizontal dimension of the active area on the pen display.

Click force.  The amount of force you must apply to the pen tip for a click to occur.

Double-click assist.  A function of the Wacom Tablet control panel that makes it easier to double-click by 
setting the size of the double-click distance.

Double-click distance.  The maximum distance (in screen pixels) that the screen cursor can move between 
clicks and still be accepted as a double-click.  Increasing the double-click distance makes double-clicking 
easier, but may cause a delay in brush strokes in some graphics applications.

Eraser-aware application.  A software application that has built-in support for the pen eraser.  
These applications take advantage of the eraser in different ways, depending on what makes sense for 
the application.

Expand.  A motion used when 

navigating with multi-touch

.  Touch the pen display surface with two fingers 

spaced closely together.  Then while still touching the display surface, move your fingers apart.

ExpressKeys.  The customizable control keys located on the pen display.  See 

using the ExpressKeys

.

Fingerwheel.  The control wheel on the optional Airbrush.

Hardware control buttons.  The function buttons located on the pen display.  See 

using the hardware 

control buttons

.

Journal.  A Microsoft Windows application that electronically simulates a physical journal pad, but with the 
advantages of digital note taking.  For example, you can create quick sketches and jot handwritten notes 
that can be converted to text and sent on to colleagues for digital mark-up.  Journal includes a variety of 
pen, marker, and highlighter tools, plus an eraser that is easily activated by the eraser end of your Wacom 
pen.  Additionally, your handwritten content is searchable within Journal.

LED.  Light-Emitting Diode.  Used as pen display indicator light(s).

Modifier.  Modifier keys include S

HIFT

, A

LT

, and C

TRL

 for Windows, or 

SHIFT

CONTROL

COMMAND

, and 

OPTION

 

for Mac.  You can customize your Cintiq tool buttons or ExpressKeys to simulate a modifier key.

Summary of Contents for Cintiq 24HD

































































































































































Reviews: