Wacker Neuson WL 30, Operator'S Manual

Page: 224 / 246

SA FET Y INSTRUC TIONS FOR R E PAIRS
222
Do not remove seals or sealing wax:
• Changing rated pressures for relief valves is prohibited
without the express consent of Wacker Neuson.
• Do not damage or remove seals and sealing wax on the
engine, the pressure limiting valves and accumulators.
• If an area is repainted and a safety label is damaged or
obliterated, replace the label before using the machine.
If a removed component or assembly had a safety mes-
sage label, replace the label with the replacement part.
Your Wacker Neuson dealer can help you to get replace-
ment labels for your machine
After completing the repair:
• Put protective paint on all uncoated machine parts to
prevent corrosion damage.
• Install the cab mounting screws again after the repair
work has been completed.
• Reattach all safety devices, covers and noise/vibration
insulation after repair work has been completed.
• Check the functioning of the loader, in particular the
parts repaired in trial operation. Make sure that no one
is in the loader‘s danger area.
• Do not approve the loader for operation until all the
loader‘s areas function properly.