Wacker Neuson WL 30, Operator'S Manual

Page: 222 / 246

SA FET Y INSTRUC TIONS FOR R E PAIRS
220
12 SAFETY INSTRUCTIONS FOR REPAIRS
Observe in particular:
• The basic safety instructions.
• The basic safety instructions for servicing and inspection.
• All warning signs and instructions attached to the loader.
• That the descriptions of work processes provide the
necessary instructions only for experienced specialized
personnel.
• That the Operator’s Manual is always kept with the loader
Repair personnel:
• Repair personnel must have specialized knowledge
and experience in repairing this or comparable loaders.
• Should knowledge be lacking, training by experienced
repair, e.g. Wacker Neuson Service, should be perform.
12.1 General safety regulations for repairs
Operator’s Manual:
• Perform repairs only if you have read and understood
the Operator’s Manual.
The »Safety instructions for repairs« section does
not consist of instructions for repairs, but rather of
safety instructions which, in addition to the gener-
ally valid safety regulations for repair work, refer to
hazards that could occur during repair work, and
of notes which should prevent the machine from
being damaged during repairs.
Specific repair instructions are not included in this
Operator’s Manual.