Wacker Neuson WL 30, Operator'S Manual

Page: 163 / 246

SE RvICINg A ND INSPEC TION
161
W L 30
Lowering the operator’s platform:
1. Remove the support bar from the pocket and return it
to storage on the crosspiece underneath the operator’s
platform.
2. Lower the operator’s platform by hand. Ensure that the
upper sections of the bearing for the operator’s platform
lie precisely on the lower sections.
3. Re-install in the mounting bolts immediately after lower-
ing the operator’s platform back in place.
4. Store the tilt lever on the back of the cab
Fig. 65 Cab safety support