HI 110 / 200 / 300
Labels
ghi_si000464gb.fm
17
M
WARNING
Licensed gas technician required.
Natural gas / liquid propane burner setup and
installation, fuel supply connection, test
firing, and burner adjustment MUST be
performed by a LICENSED professional gas
technician and must conform to the
requirements of all relevant local, state,
provincial, and Federal authorities.
Failure to heed this warning may result in an
explosion and/or fire causing property
damage, personal injury, or death.
N
Creating Green Environments
This product may help you earn credits
toward LEED® EQ 3.1 and 3.2 certification.
P
DIRECTIONS FOR OPERATION:
1. Connect the machine to 120V power sup-
ply using a 12/3 x 50 foot max. 10/13 x
100 foot max. extension cord.
2. Wait 20-30 minutes to allow the oil filter to
pre-heat the fuel.
3. Turn the machine on:
a. Continuous heat mode (I) or
thermostat mode (II)
b. If available, select high or low fire
mode.
4. To turn off, switch to (0) position.
—
WARNING
If three consecutive attempts to reset the
machine are unsuccessful, then troubleshoot
the heating system for the root cause(s) of
the lockout.
Make necessary repairs or adjustments to
ensure a safe start condition.
Ensure that the heat exchanger is free of
oil and oil vapors before starting or reset-
ting the burner.
