Operation
HI 110 / 200 / 300
30
ghi_tx001447gb.fm
4.9
Installing the Heater Duct
Overview
Optional ducts can be connected to the air outlet. This allows warm air to be evenly
distributed throughout the heating area.
NOTICE:
When using ducts, observe the static air pressure limits specified in
Technical Data
.
Requirements
Machine shut down and cooled
Machine properly positioned
Procedure
To install the ducts, carry out the following procedure.
1. Open the clamps
(a)
.
2. Slide the duct
(b)
onto the duct adapter
(c)
.
3. Close the clamp to secure the duct in place.
CAUTION
Hot surface hazard. The machine surfaces may be hot.
f
Allow the machine to cool for a minimum of ten minutes before touching it.
