Wacker Neuson G 43, Operator'S Manual

Page: 31 / 65

50Hz Mobile Generators Operating the Machine
wc_tx000884gb.fm
31
3.12 Microprocessor Display Screens
The following screens appear when the control switch is placed in the TEST posi-
tion. Scroll through the screens using the control panel arrow keys.
This screen shows the amp draw (load) on each individ-
ual phase.
This screen shows the voltage between each phase
and neutral.
This screen shows the voltage between one phase and
another.
This screen shows frequency, voltage, and current on
phase 1.
This screen shows the programmed values of the differ-
ential protection system.
This screen shows the day, date, and year. It resets
each time the battery is disconnected.
This screen shows the number of starting occurrences
and the number of failed starting attempts.
This screen shows the status of any outputs setup by
the installation engineers.
This screen shows the status of any inputs setup by the
installation engineers.
This is the hour meter display.
This screen shows: engine rpm, fuel percentage (LC);
oil pressure (PO); engine temperature (TM).
This screen shows battery voltage and amp draw.
This screen shows the supplied voltage from the genset
in kiloWatt hours.
GEN. I1 32
I2
0 I3 0
GEN. V1N V2N V3N
222 221 221
GEN. V12 V23 V13
389 388 392
GEN. V12 389
HZ 50.1 I1 32
DIF
RET 0.00 (0.30)A
0.3)S
MON 18:02:05
STARTING 135
FAILED STARTING 1
OUT 123456789ABC
01010000
IN 123456789ABCD
00111111111101
HOUR-METER
4 h 7m 40S
1500RPM LC 92%
PO 4.4bar TM 83°C
BATTERY CHARGER
27.2V 1.4A
GEN.
KWh 13953