Wacker Neuson G 43, Operator'S Manual

Page: 21 / 65

50Hz Mobile Generators Operating the Machine
wc_tx000884gb.fm
21
3.3 Control/Component Descriptions
Ref. Description Ref. Description
a Emergency stop switch
Pressing this push button stops
the generator immediately.
When pressed, the LCD display
reads: “ALARM EMERGENCY”.
To release the emergency sta-
tus, place the main control switch
in the LOCK position, then turn
and pull out the emergency stop
switch. i Socket
220V, 16A, 1P +N CEE/IEC309
b Main circuit breaker
The main circuit breaker controls
voltage to both the lugs and to
the individual circuit breakers. j Socket
380V, 16A, 3P +N CEE/IEC309
c Microprocessor
The microprocessor controls the
operation of the generator. k Socket
380V, 32A, 3P +N CEE/IEC309
d 3-phase voltage lugs
Connection point for 400V, 3Ø
loads. l Socket
380V, 63A, 3P +N CEE/IEC309
e Alternator
MeccAlte alternator (generator) m Individual circuit breaker panel
Each socket has its own individ-
ual circuit breaker.
f Engine
Deutz n Battery cut-off switch
This switch disconnects the bat-
tery from the engine and the
microprocessor.
g Grounding stake
The grounding stake is used to
connect the machine to earthen
ground. o External fuel tank connection
point and control valves
h Socket
250V, 16A, 1P + N Shuko p Engine protection switch
This switch controls battery
power to the engine and the
microprocessor.