Wacker Neuson G 43, Operator'S Manual

Page: 43 / 65

50Hz Mobile Generators Maintenance
wc_tx000885gb.fm
43
4.10 Cleaning the Engine
Prerequisites
„
Engine off
„
Engine cool
When Every 1000 hours of service or yearly
Procedure Follow the procedure below to clean the engine.
1. Cover electric/electrical components and connection: alternator, starter, gover-
nor, solenoid.
2. Blow compressed air through the engine stating with the exhaust side. Take
care not to damage cooling fins of cooling system.
3. Cold water jet or steam cleaning is allowed. Limit pressure to 60 bar and tem-
perature to 90°C.
4. Remove the covering from electric/electrical components installed in step 1.
5. Start engine and allow remaining water to evaporate.
Note: Refer to the Deutz engine manual for detailed information on maintaining the
engine.