Wacker Neuson G 43, Operator'S Manual

Page: 38 / 65

Maintenance 50Hz Mobile Generators
wc_tx000885gb.fm
38
4.5 Changing the Fuel Filter
Prerequisites
„
Engine off
„
New fuel filter
When Every 1000 hours of service or yearly
Procedure Follow the procedure below to change the oil filter.
1. Close the fuel shut-off valve(s).
2. Remove the fuel filter. Clean up any spilled fuel.
Note: Collect, store and dispose of all used fuel and filters in accordance with cur-
rent environmental protection regulations.
3. Clean the filter housing base.
4. Apply a thin coat of engine oil or diesel fuel to the seal of the new fuel filter.
5. Install the new filter cartridge and tighten by hand. When the seal contacts the
base, tighten the filter cartridge an additional 1/2 turn.
6. Open the fuel shut-off valve(s).
7. Start the engine and check for leaks.
Note: Refer to the Deutz engine manual for detailed information on maintaining the
engine.
WARNING
Fire hazard. Diesel fuel is flammable. Fire can cause severe burns.
f Keep flames and smoking materials away from the fuel system.