W6 N 5000 Exklusive, Manual

Page: 72 / 169

Using the upper thread to pull up the lower thread
Inserting the bobbin
5. Close the hook race with the plastic bobbin cover.
! The bobbin cover is in the correct position
if it clicks into place when inserted.
W6 tip
On the W6 WERTARBEIT website you will find assistance under Service / Help /
W6 N 5000 Exklusive / Videos: Optimal Threading (approx. 4 minutes long).
8.5 Using the upper thread to pull up the lower thread
1. Set the presser foot lever to the upper position.
Then press the Needle Up / Needle Down button once.
2. Hold the upper thread taut in your left hand.
3. Press the Needle Up / Needle Down button once.
The lower thread is pulled up.
4. Pull the lower thread, which creates a loop, upwards by pulling the upper
thread up at a slight angle.
72