W6 N 5000 Exklusive, Manual

Page: 14 / 169

Information on the embroidery unit
Assembling the machine
3) Switch the sewing machine on after attaching the embroidery unit. The
thread tension is shown on the sewing machine’s LCD display when using
the embroidery unit. You can adjust the thread tension using the buttons on
the control panel.
If necessary, reduce the thread tension by just one
point.
You can carry out the following on the sewing machine:
•
Start / stop
•
Thread cutter
•
Needle stop up / down / slow sewing
•
Speed control
•
Winding
When you connect the embroidery unit, the needle stop position is set to up. For
more details on use, refer to the instruction manual that came with the
embroidery unit. After embroidering, raise the feed dogs again by pushing the
drop feed lever to the right and turning the hand wheel five times (towards you).
PLEASE NOTE Accident prevention.
Switch off the sewing machine’s power plug to connect the embroidery unit.
14