W6 N 5000 Exklusive, Manual

Page: 108 / 169

Utility stitches
Using a pattern
4. Position the fabric so that the presser foot guide fits against the edge of the
hem.
! The needle should pierce the fabric as close as possible to the edge
of the fold of the hem. The right and left insertion position of the
needle is determined by turning the screw on the
blind hem foot .
Correct needle position
5. Sew the seam.
6. Turn the fabric over.
! If you have tacked the hem with a thread, the tacking thread must
be removed.
The left-hand illustration shows the wrong side of the fabric, the
right-hand one the right (front) side of the fabric.
➔
Raise the
presser
foot and
press the
Needle
Up /
Needle
Down
button.
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Blind stitch
16
17
Sewing using blind
stitch W6
90 or 75
needles
Super Stretch
(HAx1SP)
Thread tension setting Automatic
W6 tip
Blind stitches cannot be sewn if the left-hand needle insertion point does not
grasp the hem. If the needle grasps too much of the hem, then the fabric cannot
be folded and a large and unsightly seam appears on the right side of the fabric.
108