W6 N 5000 Exklusive, Manual

Page: 96 / 169

Utility stitches
Using a pattern
11.2.2 Stretch straight stitch – programs 03 and 04
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Stretch
straight stitch
003
004
Topstitching stretch
seams, tear-resistant
seam W6 90 or 75
needles
Super Stretch
(HAx1SP)
Thread tension setting Automatic
Stretch straight stitch settings
W6 note: The stitch length and stitch width can be changed manually in the
specified ranges.
W6 tip
In the case of thin and stretchy fabrics it is necessary to reinforce these fabrics
using a lining or stabiliser on the wrong side. Vary the adjustable foot pressure to
1 if necessary.
96
Please note: Every time before threading
•
Set the presser foot lever to the upper position.
•
Press the Needle Up / Needle Down button (the thread take-up lever and
needle threader automatically move into the correct position).
•
Thread the upper thread taut in all positions.
•
Thread the lower thread taut and slowly into the silver metal slot in the
7 o’clock and 9 o’clock positions on the black hook race until it clicks into
place.
•
In the event of any lack of clarity: watch the Optimal Threading video that is
just 4 minutes long on the W6 website under Service / Help / W6 N 5000
Exklusive.
•
95% of all errors occur during threading. Failure to do this will always lead to