W6 N 5000 Exklusive, Manual

Page: 161 / 169

Troubleshooting
13 Error messages
No
.
Message
1. Wind the bobbin.
2. Lower the buttonhole lever.
3. After sewing the buttonhole, raise the presser foot
lifter and move the buttonhole foot attachment to
the start position.
4. Release the foot pedal.
5. Lower the presser foot.
6. Select the pattern.
7. Release the Reverse button.
8. Release the Start / Stop button.
9. Rethread the upper or lower thread.
10. The foot controller machine is connected.
11. Release the Needle Up / Down / Slow Sewing
button.
12. Release the Thread Cutter button.
13. Switch off the power switch and rethread the
machine.
161