Vortice VORT VDH 60 HP MONO, Instruction Booklet

Page: 38 / 136

38
Completing fixing
Fig. 24
After connection, it is possible to attach equipment to the wall-mounted steel plate.
Fig. 25
Equipment should be hooked to the plate, first inserting the two steel fins set at the bottom.
Fig. 26
Complete equipment fixing by pushing it completely against the wall plate and locking it into the upper side by means of
the two corresponding screws.
Fig. 27-28
After having fixed equipment, you need to fix the air vent provided for ventilation channel closure on the outside (Fig. 39).
The air vent is supplied assembled, so therefore unscrew the two screws on the air vent cover to proceed with operations.
To secure the air vent, similarly to the instructions provided above for the plate, simply set it and centre it over the inserted
pipe, mark holes and drill.
Provided fixing screws 4
Ø Expected dowel diam. 6 mm
24 24 25 25
A
B
26 26
C
D
28 28
27 27
ENGLISH