Vortice VORT VDH 60 HP MONO, Instruction Booklet

Page: 40 / 136

40
Fig. 33-34
The figures below illustrate the nebulisation pump and the condensate collection tray.
Fixing the front cover panel
Fig. 35
After having fixed equipment inside the room, you can complete installation operations by inserting the front cover panel.
The panel should be attached by inserting the first two steel fins in the slits arranged at the bottom of the equipment.
Fig. 36
Complete front panel fixing by pushing it completely against equipment (Once the panel has been pushed to end stop on
Fig. 37
Lock it at the top by means of two of the special screws provided
Caution!:
In the initial phase of locking the cover panel, make sure that the
panel itself stays in place (use a hand or adhesive tape), thus avoiding
the risk of it falling on the ground.
!
33 33
Nebulisation
pump
Drain
de condensation
Condensate
tray
floater
36 36
2
37 37
E
F
1
35 35
34 34
Punto scarico
condensa
ENGLISH