Vortice VORT VDH 60 HP MONO, Instruction Booklet

Page: 42 / 136

42
Use
General
All device functions can be controlled via the wired control panel equipped with touch screen:
A: touch area
B: display
Meaning of icons/buttons in the touch area
1: On/off
2 : View T ext / date and hour (last two rows of the display)
3 : Exit without saving and return to the previous page
4 : Speed increase either moving the cursor to the line above or
increasing the value
5 : Speed decrease either moving the cursor to the line below or
decreasing the value
6 : Confirm the current choice and data will be saved.
Control panel functions
To switch on the unit, press to access the initial screen
(speed: default value: NIGHT) and then press .
Note: After switching the unit on, wait two minutes to allow the
internal damper to open. During this time, the message
"NIGHT" will flash and you will not be able to access the speed
menu.
Similarly, to switch the unit off, press
to access the initial
screen and then press .
Note: After switching the unit off, wait two minutes to allow the
internal damper to close. During this time, the fixed message
"OFF" will be displayed. You will not be able to access the
speed menu and you will need to wait for the shut-down
sequence to end before switching the unit back on.
Note: In general, in the absence of user input, after two minutes the display will return to the logo screen without saving
any changes. In this case, press
to reactivate the home screen.
In this phase, you can immediately change device operating speed using buttons and .
ENGLISH
F
A
B
F
1
2
3
4
5
6
F
NIGHT
25 / 01 / 18 08:07