Vortice VORT VDH 60 HP MONO, Instruction Booklet

Page: 52 / 136

52
Optional connections
Fig. 47
The equipment is designed to connect a second remote user interface.
For this connection, a cable (not supplied) is needed to connect to the terminal board shown in the following figure.
Maintenance and cleaning
Filter maintenance
Equipment is equipped with two filters: one for the air extracted from the outside and one is an electrostatic dust filter for
exhaust air extracted from inside.
Intake air filter
Air is extracted from the outside through a filter set in housing
at the top of equipment.
Equipment is provided with an internal counter which
notifies users when the filter needs to be replaced.
Fig. 48
To remove the filter, simply grasp the filter tab itself and pull up.
47 47
VCC
A
B
GND
V
C
C
A
B
G
N
D
48 48
ENGLISH
CAUTION!:
All equipment repairs must be carried out by qualified personnel. Improper repairs can put the user in serious danger.
If your equipment needs repair, contact service assistance.
!
CAUTION!:
before undertaking any maintenance operations, make sure that equipment is not and cannot accidentally be powered
electrically. Therefore, cut off the power supply for any maintenance or cleaning.
!
PLEASE NOTE!:
dirty filters decrease product performance, causing insufficient or even a total lack of ventilation.
!