31
•
Do not open or disassemble the product while it is being electrically powered.
•
Do not pour or spray water on the product or inside it.
Precautions to prevent damage to the product:
•
Do not make changes of any kind to the unit.
•
Maintenance instructions must be followed to prevent damage to and/or excessive wear of the device.
•
Do not leave the device exposed to adverse weather conditions (rain, sun, etc.)
•
Do not rest objects on the device.
•
nternal cleaning of the product must only be carried out by qualified personnel.
•
Periodically check device conditions. If imperfections are noted, do not use the unit and immediately contact the Manufac-
turer or an authorised Technical Assistance Centre.
•
Contact the Manufacturer or an authorised Technical Assistance Centre in the event of device malfunction and/or failure
and request the use of original spare parts for any repairs.
•
If the product falls or receives a strong blow, immediately have it inspected by the Manufacturer or at an authorised Technical
Assistance Centre.
•
The device must be installed so as to ensure that no one can come near its moving or live parts during normal operating
conditions.
•
If you need to dismantle the device (using appropriate tools) or remove fans: the device must already be switched off and
disconnected from the electrical mains.
•
The electrical system to which the product is connected must comply with regulations in place.
•
Only connect the device to the mains supply/ electrical outlet if plant/outlet capacity is suitable for its maximum power. If
otherwise, immediately seek assistance from a professionally qualified person.
•
Switch off the main switch on the system when: a malfunction is detected, you decide to perform external cleaning main-
tenance, you decide not to use the device for short or long periods.
•
The extracted air flow must be clean (or rather free of grease, soot, chemical and corrosive substances or explosive and
flammable mixtures).
•
Never cover the device intake and return to ensure optimal air passage.
•
The electrical specifications must correspond to the ones on the rating label.
Information on coolant used
This product contains fluorinated greenhouse gases included in the Kyoto Protocol. Do not free these gases into the
atmosphere. Type of coolant: HFC-R134a.
PLEASE NOTE!: maintenance and disposal operations must only be carried out by qualified
personnel.
ENGLISH
Caution:
this symbol indicates that care must be taken to avoid damaging the appliance
!
Summary of Contents for VORT VDH 60 HP MONO
